NFC Module for Genmega and Hantle 475.00 Lowest Price Anywhere

The new Vivopay NFC module for your Genmega and Hantle ATM’s.  Each kit comes with two parts.  The Vivopay module and the mounting hardware are separate packages.  You choose the model ATM and match the hardware for it.   The module will fit the G2500, Nova, GT5000, GT3000, T4000, Onyx, C6000.  This is the module only and the mounting kit is below for your ATM.  We do it this way in order to make sure you get the right mounting hardware and we can keep the price lower than the competition.  Compare prices and make sure you cost these out with the mounting hardware.  We have the best price anywhere, check for yourself.  As you can see, the G2500 is the most expensive hardware.  Why pay more if you aren’t using it on the G2500?

***If you want to upgrade your G1900 or Hantle 1700W, there is a way to do that.  You  will need to get an Onyx NFC upgrade kit and module – then drill holes and install it where you want.  Most people do it next to the keypad or you can put it where the camera would go in the middle of the bezel facia.  Then you’ll need to install GT3000 software available from us at no charge to make it work.  I know that the 1700W came with a 7″ screen but if you are upgrading a G1900 with and 8″ screen, you will need to change it to a 7″ screen.  I suggest that you let your processor know what you are doing as your terminal will send information that this is now a GT3000.

Please make a note and order the right NFC upgrade kit for your Genmega G2500.

New Style upgrade kit serial numbers.  If your ATM falls within the serial numbers below, order the new style kit.  Otherwise, order the old style upgrade kit.  Below is what the new style fascia looks like.  As you can see, the speaker has been relocated up to leave room to place the VivoPay module below it making it much easier and less cost than the previous version.